Licensed and Insured
Professional Mold Removal Services in Long Island, NY
Mold Damage Cleanup, Water Dryout & Restoration
24/7 Emergency Response
restoration services throughout LONG ISLAND, ny
-
24/7 Live Calls
-
At Your Door in 60 Minutes or Less
-
We Bill Your Insurance Directly
-
Locally owned and operated since 2001
-
We Stay in Communication with You
-
Certified, Experienced & Professional
Comprehensive Mold Removal Services
The concern for indoor air quality and the increase in upper respiratory ailments has renewed awareness in mold and in its effects on buildings and their occupants. DryFast Restoration is on the cutting edge of mold removal and remediation. We have the capacity to handle Long Island mold problems of all sizes.
If you have experienced a flood or have found mold growing somewhere in your Suffolk or Nassau County home or business, contact us right away. It’s important not to wait, as mold spreads very quickly and can cause much more damage the longer it sits.
Certified Mold Remediation Specialists
Any time of the day or night, the professionals at DryFast Restoration are ready to respond to your emergency, whether it be mold removal, mold remediation, or any of our services. Our friendly and professional service technicians are certified and fully-trained to handle your mold removal from start to finish. In less than an hour, DryFast Restoration will be at your location ready to begin work.
The Dangers of Mold
Below are a few things that every property owner should know about mold.
- Potential health effects associated with mold exposure include allergic reactions, asthma, and other respiratory complaints.
- There is no practical way to eliminate all mold and mold spores indoors. The way to control indoor mold growth is to control moisture.
- Reduce indoor humidity (to 30 to 60 percent) by ventilating bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and dehumidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
- Clean and dry any damp or wet building materials and furnishings within 24 to 48 hours to prevent mold growth.
- Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials, such as ceiling tiles, that are moldy may need to be replaced.
- Prevent condensation. Reduce the potential for it on cold surfaces (including windows, piping, exterior walls, roof or floors) by adding insulation.
- In areas where there is a perpetual moisture problem, do not install carpeting (for instance, near drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
- Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate the “typical” process:
Step 1: Emergency Contact
The mold cleanup and restoration process begins when you call our mold specialist will ask a series of questions to help us determine the necessary equipment, resources, and personnel.
Call Now! (631) 981-8585
Step 2: Inspection and Mold Damage Assessment
Water damage is not biased to what gets damaged and what doesn’t. For example walls, wood components, contents, flooring and insulation may all be damage when in contact with water. Therefore, our technicians will evaluate the extent of the damage using advanced professional moisture detection equipment. Furthermore, the technician will set a “drying goal” and try to meet that goal as efficiently and quickly as possible by utilizing the right tools, equipment, and methods.
Monitoring the equipment is important but so is monitoring of the air being dried which is the invisible part of this whole process technically called “Atmospheric Readings” these are taken with RH units called hygrometers this tool will let us know that we have the affected air at optimum drying conditions to dry the building material in the quickest time possible.
Step 3: Mold Containment
We use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.
Step 4: Air Filtration
Our specialized filtration equipment allows our Professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.
Step 5: Removing Mold and Mold-Infested Materials
The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. Our mold professionals use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Removing and disposing of mold-infested porous materials, like drywall or upholstery and carpeting, may be necessary to remediate heavy mold growth.
Step 6: Cleaning Contents and Belongings
Our professionals clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold. They use a variety of cleaning techniques to clean and sanitize your belongings. They’re also trained to remove odors and deodorization using fogging equipment.
Step 7: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may be removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major reconstruction services for various areas or rooms in a home or business.
We’re here for you 24/7
24 Hour Emergency Service
Get the help you need now!
Do you have a mold damage emergency? Call Us!
available 24 hours
testimonials
What Our Clients Say…
Great company and people to work with. Very happy with the results. Highly recommend DryFast following any storm and water damage problems.
- C.J. 
One of the best companies on the island to deal with. We hired DryFast to dry out a building for one of our customers and they did great job. Fast response, great equipment and incredibly knowledgable.
- S.V.
Really amazing service! The technicians that came over were so incredibly helpful, took care of my problem right away, and I didn’t need to deal with any part of the insurance headaches. Highly recommend.
- A.D.
Excellent service! Work was done professionally and neatly. Questions and concerns were addressed quickly. Highly recommend!
- B.B.
Had a great experience with DryFast when they finished. I didn’t see any trash on my property when they left and were done. Everything looked great and I am glad the technicians who came to my house knew what they were doing.
- P.S.
The DryFast crew was AWESOME! Very satisfied with this company! They answered every question I had and very helpful throughout their service!
- N.P.
DryFast crew was clean and efficient. Highly recommend!!
- A.P.
Really good restoration service, affordable fee and polite technician.
- S.G.
long island’s mold removal experts
Why Choose DryFast Restoration?
Our staff can provide a visual mold inspection. We work with independent third-party air quality experts to assess and identify indoor air quality problems. Once air and/or surface samples are collected, we will plan for a safe and efficient mold remediation following the I.I.C.R.C. Guidelines. Once work is completed, follow-up air quality and site testing will confirm the complete return of affected area to safe conditions.
